Phrozen TR300 Ultra-High Temp 3D Printing Resin
Phrozen TR300 3D printing resin has extremely high thermal resistance, high mechanical strength and some toughness, making it ideal for high temperature applications such as industrial mock-ups and the creation of 3D printed jewellery.
Key Features :
．Ultra-High Temp Resistance
With its Tg 220°C and heat deflection temperature of 190°C, Phrozen TR300 3D Printing High Temp resin is suitable for high-temperature resistance applications.
．Low Viscosity & Low Odor
Phrozen TR300 High Temperature 3D Printing resin has low viscosity to use and clean easily
．High Toughness & Low Shrinkage
Products printed with Phrozen TR300 High-Temp 3D Printer Resin have good mechanical properties such as high tensile strength, high toughness and low shrinkage rate. It is recommended for industrial prototyping applications.
Precautions :
• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
| Weight |
1 kg |
| Density |
1.17 g/cm3 |
| Viscosity |
160 cP |
| Surface Hardness |
80 Shore D |
| Tensile Stress at Break |
32 MPa |
| Elongation at Break |
2 % |
| Tensile Modulus |
1857 MPa |
| Notched Izos Impact |
8.00 J/m |
| Tg |
220°C |
| HDT at 0.45 MPa |
190°C |
| Recommened Cleaning Method |
Alcohol spray cleaning and air drying (Alcohol should not be soaked for more than 30 seconds) |