Phrozen Water-Washable 3D Printing Resin Series (1kg)
The Phrozen Water-Washable resins can be used to wash the surface directly with water; the printing speed is fast, and the hardness and toughness of the finished product are high, which is suitable for 3D printing of all kinds of models and products.
Note: Please wash with water and spray with air gun and do not pour the cleaned water directly. Please collect the lamp and filter it before dumping, or add 10% waste water treatment agent and filter or dump the residues and sediments.
Rapid Black Model Gray
Phrozen Water-Washable 3D Printing Resin Tutotrial
Precautions：
．Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
．After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
．Keep resin away from kids and away from direct sunlight exposure.
．Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
．DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Click Here to Download :
1) Rapid Black Resin Safety Data Sheet
2) Model Gray Resin Safety Data Sheet
3) Phrozen Resin Data（Sonic Mighty 4K）
Click Here to Watch :
Enjoy the light-curing printing experience with Phrozen's wide range of resins, which can be tailored to your needs and properties to give you the best finished product, or contact us for more information !
Rapid Black
| Viscosity |
120 cP |
| Density |
1.11 g/ cm3 |
| Tg |
80 °C |
| Elongation at Break |
18 % |
| Tensile Stress at Break |
15 MPa |
| Surface Hardness |
76 Shore D |
| Notched Izod Impact |
1.3 J/m |
| Wieght |
1kg |
| XY Planar Resolution |
0.050 mm |
| Suggested Layer |
30-100um |
| Recommended Cleaning Method |
Wash the surface with water and blow dry with air gun, easy to use. (Please collect the cleaning water and filter it before disposal or add 10% waste water treatment agent and filter it after disposal). |
Model Gray
| Viscosity |
125 cP |
| Density |
1.10 g/ cm3 |
| Tg |
80 °C |
| Elongation at Break |
24 % |
| Tensile Stress at Break |
12 MPa |
| Surface Hardness |
77 Shore D |
| Notched Izod Impact |
3.04 J/m |
| Weight |
1kg |
| XY Planar Resolution |
0.050 mm |
| Suggested Layer |
30-100um |
| Tensile Modulus |
110 MPa |
| Recommended Cleaning Method |
Wash the surface with water and blow dry with air gun, easy to use. (Please collect the cleaning water and filter it before disposal or add 10% waste water treatment agent and filter it after disposal). |